Netgear WGT634U Firmware 1.4.0.6 Beta

• 
• Download Netgear WGT634U Firmware 1.4.0.6 Beta

Netgear WGT634U Firmware 1.4.0.6 Beta description

OSSupport:Windows Size:4.5 MB
NETGEAR has been a worldwide provider of technologically advanced, branded networking products since 1996. Our mission is to be the preferred customer-driven provider of innovative networking solutions for small businesses and homes.New Features· Improved performance when running in SuperG 108 Mbps mode· Added RIP/RIP2 support· Support Telstra/Bigpond· Added FTP port selectionFixed Major Issues· WGT634U will not respond to FTP unless FTP account is created· Updated online help text· Change default UPnP to disable· WAN reconnection detection problem is fixed.· If LAN IP address is changed, DMZ and other IP addresses will change accordingly· Fixed backup settings for wireless and port forwarding pages.· Port 80 will work in port forwardingKnown Issues· If a site or service is blocked by router, there won’t be any “….blocked by Netgear…” pop up message.Release 1.3Firmware version: 1.3.0.6Firmware Size: 4,462,856 bytesNew Features· Support WPA-PSK· Improved performance when running in SuperG 108 Mbps modeFixed Major Issues· Fixed many wireless connection issues· Fixed PPPoE idle timeout problem· Fixed GUI refresh problem in email and wireless page after firmware upgrade· Fixed incorrect WLAN MAC address issue· Fixed UPnP port display problem· Fixed statistics page display problemKnown Issues· If a site or service is blocked by router, there won’t be any “….blocked by Netgear…” pop up message.· Telstra Bigpond support will be available in 1.4 releaseRelease 1.3 Beta (1.3.0.5)Firmware version: 1.3.0.5Firmware Size: 4,462,780 bytesNew Features· Support WPA-PSK· Improved performance when running in SuperG 108 Mbps modeFixed Major Issues· Fixed many wireless connection issues· Fixed PPPoE idle timeout problem· Fixed GUI refresh problem in email and wireless page after firmware upgrade· Fixed incorrect WLAN MAC address issue· Fixed UPnP port display problem· Fixed statistics page display problemKnown Issues· If a site or service is blocked by router, there won’t be any “….blocked by Netgear…” pop up message.· Telstra Bigpond support will be available in next beta releaseRelease 1.3 Beta (1.3.0.0)Firmware version: 1.3.0.0Firmware Date: Apr 27, 2004Firmware Filename: wgt634u-1.3.0.0.imgFirmware Size: 4,434,344 bytesMD5 Checksum: 608EE3BCCCACB62F9D66AA6D78A945C2New Features· None.Fixed Major Issues· Fixed incorrect timestamp problem· Fixed incorrect case problem of folder / file name during file copy· Fixed problem of leaving orphan file if file copy operation is terminated by user· Fixed UPnP UI problemKnown Issues· Access to the router-attached shared disk using wgt634u format may not work due to setting in Microsoft Networking. Workaround – add the router ip address ( default is 192.168.1.1 ) to WINS section in TCPIP properties. See FAQ at www.netgear.com for detail information. Workaround is to add the router IP address ( default is 192.168.1.1 ) to the TCP/IP WINS tab.· PPPoE on demand connection may not start until multiple packets are sent· WEB UI acts weird after a firmware upgrade. The fix is to follow the standard home router upgrade procedure and after a firmware upgrade, reset the router to factory default.Release 1.2Firmware version: 1.2.0.6Firmware Size: 4,432,252 bytesNew Features· Added PPTP support· Enhanced partition recognition to support special partition formatting in certain memory flash driveFixed Major Issues· PC will retrieve DHCP IP address correctly when router reboots· NTP time server is defaulted to YES· Fixed wireless connection problem when running in 108Mbps· If 108Mbps is selected, channel is now set to channel 6 only· Smart Wizard Test and Basic Setting Test pages are linked to WGT634U product specific page.· Replaced sample files· Fixed DDNS connection problem· Fixed detection and connection problem in PPPoE· Disk free space will report correct informationKnown Issues· Access to the router-attached shared disk using wgt634u format may not work due to setting in Microsoft Networking. Workaround – add the router ip address ( default is 192.168.1.1 ) to WINS section in TCPIP properties. See FAQ at www.netgear.com for detail information. Workaround is to add the router IP address ( default is 192.168.1.1 ) to the TCP/IP WINS tab.· PPPoE on demand connection may not start until multiple packets are sent· Terminating a file copy operation to a shared disk will leave an orphan partial file. Workaround is to delete Netgear WGT634U Firmware 1.4.0.6 Beta partial file manually.· During file copy operation to a shared disk, the case of the filename will be converted to lower case. There is no fix or workaround at Netgear WGT634U Firmware 1.4.0.6 Beta time.· WEB UI acts weird after a firmware upgrade. The fix is to follow the standard home router upgrade procedure and after a firmware upgrade, reset the router to factory default.Release 1.1Firmware version: 1.1.0.6Firmware Size: 4,003,944 bytesNew Features· More stable and faster FTP and networking access to router-attached shared USB disk drive.· 40% improvement in LAN-to-LAN communication· Dynamic 108Mbps mode support for faster and longer range wireless access· Added support for block sites, block service, schedule, email, port forwarding, WAN and LAN set up, DDNS and other advanced wireless settings· Added Netscape support· Added capability to change workgroup and hostname for networking accessFixed Issues· Large file copy· Free space indication in DOS DIR command· NTP server interface· Minor misc. UI fixesKnown Issues· Access to the router-attached shared disk using wgt634u format may not work due to setting in Microsoft Networking. Workaround – add the router ip address ( default is 192.168.1.1 ) to WINS section in TCPIP properties. See FAQ at www.netgear.com for detail information. Workaround is to add the router IP address ( default is 192.168.1.1 ) to the TCP/IP WINS tab.· After a router reboot, the client PC may fail to retrieve IP address via DHCP. The workaround is either reboot the PC or use IPCONFIG /RENEW to retrieve the new IP address· FTP access from WAN or Internet is not READ ONLY if the FTP setting is READ/WRITE. The workaround is to set up a different FTP account as READ ONLY.· Editing the FTP access entry or creating a new entry will cause intermittent failure in FTP log in. Workaround is to edit the FTP access entry and re-enter the password field.· Terminating a file copy operation to a shared disk will leave an orphan partial file. Workaround is to delete this partial file manually.· During file copy operation to a shared disk, the case of the filename will be converted to lower case. There is no fix or workaround at this time.· WEB UI acts weird after a firmware upgrade. The fix is to follow the standard home router upgrade procedure and after a firmware upgrade, reset the router to factory default.Release 1.0Firmware version: 1.0.0.11Firmware Size: 3,993,504 bytesNew FeaturesThis is initial release.Known Issues· If PC is set to DHCP, the PC may not retrieve the IP address correctly due to router’s long boot time ( approx. 2 minutes )· Access to the router-attached shared disk using wgt634u format may not work due to setting in Microsoft Networking.

Netgear WGT634U Firmware 1.4.0.6 Beta Tag: