Mvix MX-760HD Firmware US-Canada 1.1.17

• 
• Download Mvix MX-760HD Firmware US-Canada 1.1.17

Mvix MX-760HD Firmware US-Canada 1.1.17 description

** Mvix MX-760HD Firmware (US-Canada) 1.1.17 FIRMWARE IS FOR MX-760HD models **
RELEASE NOTES
* New Network Security Infrastructure Enabled

DOWNLOAD AND INSTALLATION INSTRUCTIONS

Please read page 42 of the MX-760HD User Manual for firmware installation instructions.
1. Download the file by clicking the Download button below
2. Save the file on your computer (any directory).
3. Unzip the file.
4. Transfer the file to your MX-760HD via USB or transfer the file to a USB memory stick and use the USB host port on your MX-760HD
5. Disconnect the USB cable from your Mvix and Connect the Mvix player to your TV.
6. Turn on your Mvix and press SETUP on your remote or unit
7. Navigate to the MISC option in the SETUP menu of your Mvix.
8. Select the Firmware Upgrade option
9. Navigate to the internal HDD in your Mvix or USB memory stick containing the firmware update file. PLEASE NOTE: Do not upgrade the firmware via your network shared folders, as a loss in connection to the network could cause a break in the firmware upgrade process.
10. Once you have located the file, highlight the file and press ENTER on your remote to begin the upgrade process

** CAUTION: DO NOT POWER-OFF THE MVIX DURING THE FIRMWARE UPGRADE PROCESS **

Firmware upgrades can cause the wireless function to stop functioning on some routers. The solution to Mvix MX-760HD Firmware (US-Canada) 1.1.17 is to manually enter the correct addresses in the setup screen. You will need to note the IP address assigned to your MX-760HD, your routers IP address and your subnet mask. Please refer to your routers user manual for more details on these addresses.
To access the network setup screen, follow these steps:
1) Turn on your MX-760HD
2) Press Setup on your remote
3) Scroll down to Network
4) Scroll over to Address Setup and select Manual
5) Enter in the addresses below
IP Address: IP address is the address assigned to your MX-760HD by the router. Open your router setup, Open DHCP Client List, and look for an IP address with no name next to Mvix MX-760HD Firmware (US-Canada) 1.1.17.
Netmask: Your subnet mask can be found in the router setup. Mvix MX-760HD Firmware (US-Canada) 1.1.17 is usually 255.255.255.0.
Gateway: To access your router, you will need to know the IP address for the router (usually 192.168.0.1 or 192.168.1.1). Mvix MX-760HD Firmware (US-Canada) 1.1.17 is the address you will enter as the gateway address.
6) Select Wireless Apply
7) Repeat Mvix MX-760HD Firmware (US-Canada) 1.1.17 several times until Mvix MX-760HD Firmware (US-Canada) 1.1.17 reads Success
Please refer to your routers manual for help finding these addresses and setting up the IP address for your MX-760HD. If you need further help with network setup, please refer to Mvix MX-760HD Firmware US-Canada 1.1.17 article:

Mvix MX-760HD Firmware (US-Canada) 1.1.17 is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. Mvix MX-760HD Firmware US-Canada 1.1.17 will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Mvix MX-760HD Firmware US-Canada 1.1.17 Tag: