Dell PowerEdge 1800 Adaptec CERC SATA1.56ch Firmware 17.07.2007

Dell PowerEdge 1800 Adaptec CERC SATA1.56ch Firmware 17.07.2007 description

OSSupport:Windows 2003 Size:1.3 MB
System Features:Form factor Tower or 5U rack-mountProcessors Up to two 64-bit Intel® Xeon™ processors at up to 3.8GHzFront side bus 800MHzCache Up to 2MB L2Chipset Intel E7520Memory 256MB/12GB DDR-2 400 SDRAMI/O channels Six total: two PCI ExpressTM slots (1 x 8 lane and 1 x 4 lane);two PCI-X® slots (64-bit/100MHz); one PCI (32-bit/33MHz, 5v)and one PCI (64-bit/66MHz)Drive controller Embedded single channel Ultra320 SCSI and two-channel SATA controllerRAID controller Optional CERC SATA 6ch, CERC SATA 2S, PERC 4/DC, PERC 4/SCand PERC 4e/DCDrive bays Six 1 Ultra320 hot-plug SCSI drives or six cabled SATA drivesMaximum internal storage SCSI: up to 1.8TB with availability of 300GB hard drive; SATA: up to 1.5TBHard drives1 36GB, 73GB, 146GB and 300GB (10,000 rpm) Ultra320 SCSI18GB, 36GB, 73GB and 146GB (15,000 rpm) Ultra320 SCSI40GB, 80GB, 160GB and 250GB (7,200 rpm) SATAInternal storage 10K/15K RPM SCSI drives; 7,200 RPM SATA drivesExternal storage Dell PowerVault™ SCSI and Dell/EMC fibre channel storageTape backup options Internal: PowerVault 100T, 110T; 1/2 height tape drives supported internallyExternal: PowerVault 114T, 124T, 132T and 136TNetwork interface card Single embedded Intel 10/100/1000 Gigabit2 NIC; Intel PRO/1000 MT GigabitNIC (copper), Intel PRO/1000 MF Gigabit NIC (fibre)Power supply 650W non-redundant or 675W hot-plug redundant powerAvailability ECC memory, Single Device Data Correction (SDDC); optional hot-plugSCSI hard drives; optional hot-plug redundant power; tool-less chassis;high availability fibre channel and SCSI cluster support; optionalhardware or software RAID; Active IDVideo Embedded ATI Radeon 7000-M with 16MB SDRAMRemote management Baseboard Management Controller with IPMI 1.5 compliance,accessible via network or serial port; optional DRAC 4/P PCI cardSystems management Dell OpenManage™Rack support 4-post (Dell rack) and 3rd party

Dell PowerEdge 1800 Adaptec CERC SATA1.56ch Firmware 17.07.2007 is highly recommended to always use the most recent driver version available.Try to set a system restore point before installing Dell PowerEdge 1800 Adaptec CERC SATA1.56ch Firmware 17.07.2007. Dell PowerEdge 1800 Adaptec CERC SATA1.56ch Firmware 17.07.2007 will help if you installed a wrong driver.