Biostar P4TPTSE Bios 1.8

Biostar P4TPTSE Bios 1.8 description

OSSupport:Windows Size:330 KB
Socket 478 Intel ( Intel , Intel CPU ( AMD , Intel ) )?Pentium 4 processor up to 3.06GHz(FSB533), 3.6GHz(FSB800) and Celeron Processor up to2.4GHz 800MHz System interface speed 4-Phase Power DesignDesign for Optimal Performance Chipset Intel 875P/ICH5RMEMORY Dual Channel 128bit (See Dual Channel Guidelines) ECC Support 4 x 184-pin DDR SDRAM DIMM Maximum 4GB PC3200/2700 DDR SDRAM Dual Channel Guidelines Matched DIMM configuration in each channelSame Density (128MB, 256MB, 512MB, 1GB, etc.)Same DRAM technology(128M-bit, 256M-bit, or 512M-bit)Same DRAM bus width (x8 or x16)Both either single-sided or dual-sided Matched in both Channel A and Channel B Memory channelsPopulate symmetrical memory slotsINTEGRATED Audio ( Audio , Audio Codecs , Audio Convertors , Audio Editors , Audio Mixers , Audio Plugins ) C-Media CMI9739A 6-Channel AC¡¦97 Codec ( Audio Codecs , Video Drivers Codecs ) WLAN RTL 8180 + Biostar AirLink?RF Module Gigabit LAN Intel 82547EISupports Communicationn Streaming Architecture Interface(CSA)Direct Connect to the MCH of North Bridge (Intel 875P) IDE RAID VIA VT 6410Supports RAID 0, RAID 1, RAID 0+1 Level and JBODDual Channel Master Mode PCI Supporting Four Enhanced IDE Devices SATA RAID ICH5R/Intel RAID TechnologySupports RAID 0(Striping)Data Transfer Rates up to 1.5GB/sHard Drives Can Read and Write Data in Parallel to Enhance Performance IEEE1394a VIA VT6307Supports 2 Ports with Transfer up to 400mbps Optimal platform performance with Dual Channel, DDR400, matched DIMMsFully loaded configurations can be single or double sided DIMMsLightly loaded configurations need to be double sided DIMMs When not using DDR400, best performance obtained withSymmetrical DIMM population and matched double-sided DIMMsLightly loaded configuration1 x PCI 1 x AGP 1 x CNR 1 x WLAN Module Slot