ATI Catalyst 8.4 WDM Driver xp

ATI Catalyst 8.4 WDM Driver xp description

OSSupport:Windows XP Size:4 MB
These release notes provide information for the Windows Driver Model (WDM) versions 4.07 and 8.476.Desktop ( Desktop Management , Discount Desktop Computers ) product family supportThe WDM driver is a series of drivers used to enable the Capture and TV ( TV Tuner & Co Drivers , HDTV Televisions ) tuner features on VIVO boards, and the All-In-Wonder series of cards produced by Advanced Micro Devices Inc.The WDM Driver Install bundle contains both the WDM Driver 4.07 and 8.476. The setup program automatically detects the Graphic adapter installed in your System and installs the appropriate WDM components for the graphic adapter. The WDM version 8.476 will install on: * ATI All-In-Wonder X1900 Series * ATI All-In-Wonder X1800 Series * ATI All-In-Wonder X800 Series * ATI All-In-Wonder X600 Series * ATI All-In-Wonder 2006 Series * ATI All-In-Wonder 9800 Series * ATI All-In-Wonder 9600 SeriesThe WDM driver version 4.07 will install on: * ATI radeon 9200 series or earlier ATI All-In-Wonder products * VIVO productsNote: The WDM driver is not required for AMD graphics only products.Note: The WDM driver should be installed in conjunction with the corresponding recommended display driver for your product. ATI WDM Driver Installation OverviewThere are two phases that occur during the installation of the WDM driver that has been downloaded from the AMD Web Site. The first phase occurs when you run the 8-4_xp32_dd_ccc_wdm_enu_60999.exe File ( File Editors , File Managers ). ATI Catalyst 8.4 WDM Driver xp phase creates a temporary directory on the system disk and unpacks all the individual files that make up the Software bundle.In the second phase the SETUP program is launched from the temporary directory created in the first phase. SETUP installs the software (from the temporary directory) into the operating system.ATI WDM Driver Installation TipsYou must Download the 8-4_xp32_dd_ccc_wdm_enu_60999.exe file, and save ATI Catalyst 8.4 WDM Driver xp to a temporary directory on your systems hard disk. For example C:temp is a common directory used to initially save a file into. Once you have downloaded the file, follow these steps: 1. Close all active programs 2. Click the START button and select the RUN. 3. Click the BROWSE button. 4. Browse to the directory where 8-4_xp32_dd_ccc_wdm_enu_60999.exe file is saved to. 5. Select the 8-4_xp32_dd_ccc_wdm_enu_60999.exe file and click OK to start the installation. 6. Follow the instructions on the screen to complete the installation. The individual files are unpacked and placed into a directory on your hard disk. The default path for ATI Catalyst 8.4 WDM Driver xp directory is C:ATIsupport. After copying the files to the hard disk the INSTALLATION program will launch automatically. At this time, You can choose to abort the INSTALL process if you wish. If you do abort the installation, no software will be installed.Manual Installation instructionsTo manually start the installation of the WDM driver, follow these steps: 1. Click the START button and select the RUN. 2. Click the BROWSE button. 3. Browse to the directory where the files were unpacked. Note: The default directory is C:ATIsupport. 4. Select SETUP.EXE and click OK. 5. Follow the instructions displayed to complete the installation. Known IssuesThis section provides information about known issues you may encounter when installing the WDM driver.Unknown Device MessageIf you install the recommended Display Driver before installing the WDM driver, you may encounter an UNKNOWN DEVICE message when restarting your Computer. If this occurs, follow these steps: 1. Select CANCEL for all UNKNOWN DEVICES that are detected 2. Install 8-4_xp32_dd_ccc_wdm_enu_60999.exe 3. Restart the computer Missing File MessageDuring installation of the WDM driver, you may encounter a message which indicates a driver file cannot be found. Typically this will occur after the system has been restarted and NEW HARDWARE is being detected. To work around this issue, follow these steps: 1. BROWSE to the directory where the new drivers were unpacked. The default directory is C:ATIsupport. 2. Run Setup.exe. Version ConflictsWhen installing Display Drivers or Software a Version Conflict message may appear multiple times during the installation.If you encounter a Version Conflict message while installing this display driver select the NO option to proceed.Note: Selecting NO ensures that the components of this driver bundle will replace your existing driver components. Selecting YES option results in a MIX of new and old driver components, which is not recommended. Confirm File ReplacementWhen installing Display Drivers or Software a Confirm File Replace message may appear multiple times during the installation.If you encounter a Confirm File Replace message while installing this display driver select the YES option to proceed.Note: Selecting YES ensures that all the components of this driver bundle will replace your existing driver components. TV Player ( Audio Players , MP3 Players , Video Drivers Players ) Failed To Initialize Video, running Multimedia CenterSome display drivers will not recognize or function with the software contained in tv-capture-wdm-4-07-6246v3-5-01-6300.exe. If you experience problems with your TV or Capture Application be sure to install the recommended Display driver for your graphic card.If problems continue and you are using the recommended display driver for your graphic card, follow these steps: 1. Go to the DEVICE MANAGER. 2. Double-click the Sound, Video and Game controller and ensure all the WDM components listed below are present and functioning properly. For the WDM version 4.07 (6246) the component list consists of: * WDM Specialized PCD Codec ( Audio Codecs , Video Codecs ) * WDM Rage Theater Audio ( Audio , Audio Codecs , Audio Convertors , Audio Editors , Audio Mixers , Audio Plugins ) * WDM Rage Theater Video * WDM TV Audio Crossbar * WDM TV Tuner * WDM Specialized MVD Codec For the WDM version 8.36 the component list consists of: * T200 Unified AVStream Driver Right click and select properties for each WDM component and ensure that the properties state that This device is working properly. If any device is not working properly, follow these steps: 1. Select and remove all of the components shown under Sound, Video and game controller. 2. Close the DEVICE MANAGER. 3. DO NOT restart the system. 4. Install 8-4_xp32_dd_ccc_wdm_enu_60999.exe 5. Restart the system. Note: DirectX 8.1 or DirectX 9 must be installed for Windows 2000 and Windows Millennium.

ATI Catalyst 8.4 WDM Driver xp is highly recommended to always use the most recent driver version available.Try to set a system restore point before installing ATI Catalyst 8.4 WDM Driver xp. ATI Catalyst 8.4 WDM Driver xp will help if you installed a wrong driver.